RCDC We Love Drifting

Das Upperdeck liegt bei der Conversion unter der Kardanwelle und ist so wie´s aussieht an 5 Stellen mit der unteren Karbonplatte verbunden. - In die Längsrichtung sollte das sehr stabil sein und seitwärts einiges an Flex bieten.

(12-01-2012 19:12)newdots schrieb: [ -> ]Reicht das wohl aus damit sich die Bodenplatte nicht verwindet?

Vielleicht hat man das extra so gemacht damit es sich verwindet ?
Mist , wofür war das noch mal gut ?

News !

-Eagle Racing R31 Rear Pulley Mount


Another R31 option part added to the Eagle Racing product line-up. This time is rear pulley holder mount for the Street Jam OTA-R31 and R31 based chassis. Available in blue or gold anodized aluminum colors, these parts are available now for the R31 chassis. This option part is a good replacement for the stock plastic resin parts.

Made of high quality aluminum alloy, this option parts will added durability and structural integrity to the moving pulley parts. The new rear pulley mount increases the rigidity of the pulley holder and allows the moving parts to work more effectively. Eagle boasts that it will reduce the friction losses and result in smooth acceleration. The material is also light weight for best chassis performance. The new colours also add more style and color to your chassis. This option part is available now, get them before they run out.





SP OTA-R31 Lightweight Rear Pulley Mount

-Made of high quality aluminum alloy
-Lightweight and durable
-Blue or Gold anodized to match your style
-Reduce friction loss for better performance
-Greater stiffness and rigidity
-Hex hardware for fastening
-Compatible with R31 based chassis

Preis : 1680 Yen

Quelle : Eagle Racing / Drift Mission

News !

-Eagle Racing R31 Carbon Chassis Stiffeners


Another R31 option part added to the Eagle Racing product line-up. This time is front and rear carbon stiffeners for the Eagle Racing GRT R31 chassis. Made from a carbon FRP material, the stiffeners will increase chassis rigidity. These parts are available now for the R31 chassis.

Made of high quality carbon graphite, this option part will add durability and structural integrity to front and rear chassis rigidity. The material is lightweight to reduce weight while increasing overall chassis stiffness. Chassis stiffness is good but flex is not a bad thing also, it all comes down to driver preference. These front and rear stiffeners are only compatible with Eagle Racing R31 GRT chassis, they are not compatible with original Street Jam plastic parts. This option part is available now, get them before they run out.

Eagle Racing R31 GRT Front Stiffener



-Made of high quality carbon FRP
-Lightweight and durable
-Increase chassis rigidity for better performance
-Hex hardware for fastening
-Compatible with Eagle GRT R31 chassis only

Preis : 780 Yen

Eagle Racing R31 GRT Rear Stiffener



-Made of high quality carbon FRP
-Lightweight and durable
-Increase chassis rigidity for better performance
-Hex hardware for fastening
-Compatible with Eagle GRT R31 chassis only

Preis : 780 Yen

Quelle : Eagle Racing / Drift Mission

News !

-Eagle Racing R31 Front Pulley Holder


Another R31 option part added to the Eagle Racing product line-up. This time is the Front Pulley Holder for the Eagle Racing GRT R31 chassis. This new option part is the middle brace between the front lay-shaft and battery holder. These parts are available now for the R31 chassis.

Made of high quality aluminium alloy this option part will add durability and structural integrity to centre portion of the chassis. The material is lightweight to reduce weight while increasing chassis stiffness. The mount for the centre fan is also integrated into the pulley holder bulkhead. This new option part will give the drive-train a more rigid support. The result is a reduced friction in the bearings and lay-shaft for better operation.

Eagle Racing R31 GRT Front Pulley Holder





-Made of high quality aluminium alloy
-Lightweight and durable
-Increase chassis rigidity for better performance
-High efficiency cooling Eagle cooling fan is included
-Hex hardware for fastening
-Compatible with Eagle GRT R31 chassis
-Available in Gold or Blue anodized colors

Preis : 2580 Yen

Quelle : Eagle Racing / Drift Mission

News !

-Eagle Racing Steering Angle Gauge


Curious about how much steering angle your RC drift chassis is capable of? It is very easy with this new Eagle Racing Steering Angle Gauge. This new easy to use tool will provide accurate measurements of how much steering angle you are getting from your chassis.

Eagle has developed a new tool for measuring steering angles for your RC drift car. Simply line-up the straight edge with the front damper stay, and use the protractor wheel to accurately measure the steering angle. This new tool is very useful to ensure that your steering angle is consistent. The tool also provides a ruler for any straight measurements. It also has a ride height gauge built into it.















3887 – Eagle Racing Steering Angle Gauge

-Available in Black, Blue, Gold, Light Blue, Purple and Red
-Measuring steering angle
-Measuring Ride Height
-Also a ruler

Preis : 1380 Yen

Quelle : Eagle Racing / Drift Mission

Sind die Aluteile alle dabei?
Beim Carbon Drift Chassis Set von Eagle Racing? - Frontmotor (Erste Seite)

Und welche Shops vertreiben das? Hab nur Boardtec gefunden für 82$ + 17$ Versand.

Alles was auf dem Bild zu sehen ist, ist auch dabei. - Zum anderen, Broadtech ist der "Werksverkauf" von EagleRacing. Billiger bekommst Du das Kit sicher nicht, es sei denn gebraucht. - V2 auf Seite 5 hier ist aber die bessere Wahl denk ich, wegen der verbesserten Lenkung und mehr Flex im Chassis ...